stick charcoal briquette making machine for BBQ

Briquetting is a process during which raw materials are compressed under 
high pressure and high temperature. After the processing of drying and
pressing, the briquette is characterized by high density, small in size, 
better combustion, capable as the substitute for the superior coal or firewood.
The lignin content that occurs naturally in biomass is liberated under 
high pressure and temperature.
 Lignin serves as the glue in the briquetting process, thus binding, 
compressing the biomass to form into high density briquettes. During 
this process, no binder needs to be used. So the outputting briquette is a
 type of clean and green fuel that is ideal for use in furnaces, boilers and 
open fires.

what raw materials can be used for the charcoal making machine?

the raw materials are wide for the charcoal making machine,most of
organic bio agro wastes can be used to make stick charcoal like, wood sawdust,rice husk,rice straw,wheat straw,corn stalk,wheat bran,coco nut shells,olive waste,sunflower waste,bamboo waste,corn cob and so on. we can see that the raw materials for the charcoal briquette machine is very wide and very easy to find around us.we can use these waste and turn them into value.but before we use these wastes,we have to handle them a little simply,such as using a hammer mill shredder to make them into around 3mm powder,and control the moisture content at about 7–12%.,hammer mill shredder is also used together with a pellet mill to make wood pellets or animal feed pellets

charcoal making machine 20130311113759_2635

stick shape charcoal fuel making machine

This charcoal making machine is applicable to make all kinds of powder or granule into different shapes. the charcoal making machine can make shisha charcoal from charcoal powder. 
The output charcoal is in high density, smooth surface, perfect shape and 
good appearance. Meanwhile, the charcoal briquette making machine is easy for combustion, no smell and last longer when burning. The 
density of the finished product also can be adjustable.
We can supply different molds to make different shapes, such as square, 
oblong, annularity, diamond, triangle, cylinder, cone, etc. According to 
customer’s requirement.
raw materials required
1.For using material of two or more types, It should be mixed in suitable form
2.size:samaller than 5mm , if the material can not accheive the reuirment, 
the raw materials  should be crushed first with hammer mill shredder
3moisture :8-12%,If raw material has high moisture it should be reduced 
by Sun drying or using flash drie
4.the feed material should be even
5.there is another one type pellet mill which is used to make small wood pellets,it is portable and very suitable for home use.
1 wood briquette 2011672318121